Product Description
The Vykon® IO-34 is a compact direct I/O module for auxiliary monitoring and control when used with a JACE-2 or JACE-6 series controller (JACE-2/6), or other JACE® platforms as identified in their respective datasheets. This option expands the JACE by an additional 34 logic-controlled points. Included are 16 universal inputs, 10 form “A” (SPST) relay outputs, and 8 analog (voltage only) outputs. This greatly expands the JACE’s monitoring and control capabilities with fast, reliable, direct inputs and outputs for monitoring power, temperature, humidity, and status. In addition, the IO-34 provides power to the attached JACE, using either an externally-supplied 24Vac transformer or 24Vdc power supply. The on-board I/O can be used to monitor pulse contacts from power/demand meters, analog sensors, or transducers, as well as to control energy-consuming devices such as fans, lights, or pumps with digital relay outputs. Also included are eight analog outputs to proportionally control dampers, valves, and other devices. A maximum of one IO-34 module may be used per JACE. However, two (2) additional IO-16 modules can also be used, to provide a total of 32 UIs, 18 relay outputs, and 16 analog output points.
 IO 34 (758.3 kB)
|
Product Description
The Vykon IO-16 is a compact direct I/O module for auxiliary monitoring and control when used with a JACE-2 or JACE-6 series controller (JACE-2/6) or other JACE platforms as identified in their respective datasheets. This option expands the JACE by an additional sixteen logic-controlled points. Included are eight universal inputs, four form “A” (SPST) relay outputs, and four analog (voltage only) outputs. This greatly expands the JACE’s monitoring and control capabilities with fast, reliable, direct inputs and outputs for monitoring power, temperature, humidity, and status. The on-board I/O can be used to monitor pulse contacts from power/demand meters, analog sensors, ortransducers, as well as to control energy-consuming devices such as fans, lights, or pumps with digital relay outputs. Also included are four analog outputs to proportionally control dampers, valves, and other devices. Up to four IO-16 modules may be cascaded to a JACE-2/6, to provide a total of 32 UIs, 16 relays, and 16 analog output points.
IO 34 (758.3 kB)
|
Overview
The NPM-GPRS modem option is part of the Tridium portfolio of hardware, software and tools designed for remote monitoring and control applications that enables end-to-end automation and device-to-enterprise integration.
The NPB-GPRS modem option card allows a JACE® controller to communicate via cellular communications where connectivity to a LAN, WAN, or VPN is either unavailable or not desired. The connection is established via standard GPRS cellular modem using a local cellular service provider. Delivered with a small dual-band antenna, The NPB-GPR option card may be installed in any JACE®-2 or JACE®-6 platform running NiagaraAX 3.4 or higher. A service contract with an approved Cellular Service Provider is required and is must be purchased separately; refer to Ordering Information below..
|
|
|
<< Start < Prev 1 2 Next > End >>
|
|
Page 1 of 2 |
